China Auto Mold: Rise in the field of Technologies

China Auto Mold: Rise in the field of Technologies

Due to the advancement in manufacturing field, the utilization of the steel copper alloy has reached almost one hundred percent. And due to which the china auto molding sector has changed the manufacturing approach from rough shaping of the material to the net shaping processing so that it gains a higher efficiency supplying the material at low expense and light weight. And the use of net shape manufacturing technique helped the existing china auto mold industries to save power and components so that it could provide effective sliding bearing accessories which could additional aid in the improvement of china’s automotive market.

China has been gaining higher recognition considering that past handful of decades in it automobile business. Although, some fundamental parts like axes guide, thrust washers, bearing bush and car mold parts and their requirements are primarily dependent on imports that can bring the favorable golden possibilities and the great challenges to the other Chinese based manufacturers and china auto mold supplier industries. Software program used by them: Unigraphics, Pro-E, Solidworks, Moldflow. They have the higher precision tooling machine with the operating group with project department, top quality department and processing department devoted in the whole order processing manage. China auto mold has their own division for project study and new item development.
According to Liu Depu, the Secretary-General of Shanghai Die &amp Mould Market Association, the Chinese mould market will present ten trends in the future.

1.The very first one particular is that mould products are increasingly larger.
two.The second trend is that the precision of the mold will be greater.
three.The third trend is that the multi-functional mould complicated will be further created.
four.Fourthly, the proportion of hot runner Molds are steadily enhanced.
five.Fifthly, some new moulds that adapt to higher-stress injection and molding will be developed with the continuous improvement of plastic molding process.
six.The sixth one is that the application of regular parts will be much more extensive.
7.Seventhly, the prospect for rapid Economic molds are very broad. These days is the era of several varieties of small batch production.
eight.Eighthly, the ratio of die-casting molds will continue to boost with the development of cars and electrical items.
9.The ninth a single is that the proportion of plastic molds will continue to boost.
10.The tenth is that the technical content of mould items will continue to be enhanced.

Presently, the china auto mold supplier industries have left behind all the standard bi-metal bearing manufacturing technology as it will have the very best independent intellectual house of china by adopting the far more energy and material saving technology. The unique china auto mold supplier industry uses the least investment and usage of equipments. Therefore, it is serving as an exceptional and grand opportunity to be grabbed for improvement.

Ravi Kumar is an knowledgeable writer and blogger. Hello Pals, I have written my view on the China Auto Mold business. Have a look. For far more data go to our web site. Comply with at twitter(@automotivemould) for standard updates.

A lot more Plastic Auto Mold Articles

What is Injection Moulding China

What is Injection Moulding China

A mould is a device that is utilised to make plastic items to be formed entirely and have precise dimensions. A good number of businesses around the globe obtain Injection Moulding China produced moulds. Some of these organizations make extremely enormous purchases and several of them have already set up obtain offices in China. This is due to the fact that the moulds are of high high quality and are sold at low rates.

Injection Moulding China moulds are of high high quality which evaluate really properly with moulds from countries such as America, Britain and other European nations. These moulds from China fetch competitive rates in the industry and this has produced other makers shed their market share to China. Injection Moulding China mould producing is a enterprise that is expanding by day. Most of the producers guarantee that they employ technical sales representatives who have a good command of the English language. For an injection moulding project to operate nicely, technical knowhow is the a single extremely substantial thing that is essential.

Injection Moulding China moulds projects are carried out making use of drawings that are sent by engineers from getting organizations. The drawing is generally scrutinized on how the mould shall be made in terms of material, formation, dimension and expense cutting. Buyer satisfaction is the essential right here and so the manufacturer guarantees that all the client needs regarding the mould formation are met to the letter. Most of the Injection Moulding China businesses have their own tooling plants, and as a result they are capable of generating high quality moulds for export to European businesses including America, Germany, Italy, Canada and numerous other nations. They employ mould engineers who are conversant with mould technologies and can communication in English with the consumers.

The Injection Moulding China businesses manufacture higher quality moulds that compete with American produced but at Chinese prices, which means rates that are really low. They make certain that they give you a competitive quotation following reviewing your specifications. The companies have a repute of manufacturing the appropriate moulds for the best price tag and they assure their perform.

To get the greatest out of Injection Moulding China created moulds, you need to have to look at references from businesses that have currently worked with them. You can by no means go wrong with moulds that are manufactured by leading rated mould creating firms in China. Look no additional come to Injection Moulding China businesses for all your injection mould requirements. You will get quite special moulds with no regrets at all!

Uncover more details relating to China prototyping, and Shenzhen factories right here.

More Injection Moulding China Articles

Nice China Automobile Molds Factory pictures

Nice China Automobile Molds Factory pictures

Check out these china automobile molds factory images:

Stalinorgel. Stalin’s Organ. Сталинский орган.
china automobile molds factory
Image by Peer.Gynt
Katyusha multiple rocket launchers (Russian: Катюша) are a variety of rocket artillery first built and fielded by the Soviet Union in Planet War II. Compared to other artillery, these numerous rocket launchers deliver a devastating quantity of explosives to an location target speedily, but with decrease accuracy and requiring a longer time to reload. They are fragile compared to artillery guns, but low-cost and easy to produce. Katyushas of World War II, the initial self-propelled artillery mass-made by the Soviet Union,[1] have been usually mounted on trucks. This mobility gave Katyushas (and other self-propelled artillery) one more benefit: getting capable to provide a big blow all at once, and then move prior to being positioned and attacked with counter-battery fire.

Katyusha weapons of Globe War II included the BM-13 launcher, light BM-8, and heavy BM-31. These days, the nickname is also applied to newer truck-mounted Soviet numerous rocket launchers—notably the typical BM-21—and derivatives.

The nickname

Initially, the secrecy kept their military designation from becoming recognized by the soldiers who operated them. They had been known as by code names such as Kostikov Guns (soon after the head of the RNII), and lastly classed as Guards Mortars.[two] The name BM-13 was only permitted into secret documents in 1942, and remained classified until right after the war.[three]

Due to the fact they have been marked with the letter K, for Voronezh Komintern Factory,[3] Red Army troops adopted a nickname from Mikhail Isakovsky’s well-known wartime song, Katyusha, about a girl longing for her absent beloved, who is away performing military service.[4] Katyusha is the Russian equivalent of Katie, an endearing diminutive form of the name Katherine: Yekaterina →Katya →Katyusha.

German troops coined the sobriquet Stalin’s organ (German: Stalinorgel), soon after Soviet leader Joseph Stalin for its visual resemblance to a church musical organ and alluding to the sound of the weapon’s rockets. They are known by the identical name in Sweden. [four]

The heavy BM-31 launcher was also referred to as Andryusha (Андрюша, “Andrew”, endearing diminutive).[five]
Katyushas of Planet War II

Katyusha rocket launchers have been mounted on several platforms throughout Planet War II, which includes on trucks, artillery tractors, tanks, and armoured trains, as properly as on naval and riverine vessels as assault support weapons.

The style was relatively simple, consisting of racks of parallel rails on which rockets were mounted, with a folding frame to raise the rails to launch position. Every truck had amongst 14 and 48 launchers. The 132-mm diameter M-13 rocket of the BM-13 program was 180 centimetres (70.9 in) long, 13.2 centimetres (five.two in) in diameter and weighed 42 kilograms (92 lb). Initially, the caliber was 130 mm, but the caliber was changed (initial the designation, and then the actual size), to avoid confusing them with normal artillery shells[3]. It was propelled by a solid nitrocellulose-primarily based propellant of tubular shape, arranged in a steel-case rocket engine with a single central nozzle at the bottom finish. The rocket was stabilised by cruciform fins of pressed sheet steel. The warhead, either fragmentation, high-explosive or shaped-charge, weighed around 22 kg (48 lb). The range of the rockets was about five.four kilometres (3.4 mi). Later, 82-mm diameter M-8 and 310-mm diameter M-31 rockets were also developed.

The weapon is much less accurate than standard artillery guns, but is really successful in saturation bombardment, and was particularly feared by German soldiers. A battery of 4 BM-13 launchers could fire a salvo in 7–10 seconds that delivered four.35 tons of high explosives over a 4-hectare (ten acres) effect zone.[two] With an efficient crew, the launchers could redeploy to a new place immediately following firing, denying the enemy the opportunity for counterbattery fire. Katyusha batteries were often massed in quite huge numbers to generate a shock impact on enemy forces. The weapon’s disadvantage was the lengthy time it took to reload a launcher, in contrast to conventional guns which could sustain a continuous low price of fire.

The sound of the rocket launching also was distinctive in that the continuous &quotwoosh&quot sound that came from the firing of the rockets could be employed for psychological warfare. The rocket’s devastating destruction also helped to decrease the morale of the German army.

Development
Katyushas of Planet War II

Katyusha rocket launchers were mounted on numerous platforms in the course of World War II, including on trucks, artillery tractors, tanks, and armoured trains, as nicely as on naval and riverine vessels as assault support weapons.

The design and style was relatively easy, consisting of racks of parallel rails on which rockets were mounted, with a folding frame to raise the rails to launch position. Each truck had in between 14 and 48 launchers. The 132-mm diameter M-13 rocket of the BM-13 method was 180 centimetres (70.9 in) extended, 13.2 centimetres (five.2 in) in diameter and weighed 42 kilograms (92 lb). Initially, the caliber was 130 mm, but the caliber was changed (initial the designation, and then the actual size), to keep away from confusing them with typical artillery shells[three]. It was propelled by a solid nitrocellulose-based propellant of tubular shape, arranged in a steel-case rocket engine with a single central nozzle at the bottom end. The rocket was stabilised by cruciform fins of pressed sheet steel. The warhead, either fragmentation, higher-explosive or shaped-charge, weighed about 22 kg (48 lb). The range of the rockets was about five.four kilometres (three.4 mi). Later, 82-mm diameter M-8 and 310-mm diameter M-31 rockets were also developed.

The weapon is significantly less correct than conventional artillery guns, but is incredibly successful in saturation bombardment, and was especially feared by German soldiers. A battery of 4 BM-13 launchers could fire a salvo in 7–10 seconds that delivered four.35 tons of high explosives over a four-hectare (10 acres) impact zone.[two] With an efficient crew, the launchers could redeploy to a new location quickly after firing, denying the enemy the chance for counterbattery fire. Katyusha batteries have been usually massed in extremely large numbers to produce a shock impact on enemy forces. The weapon’s disadvantage was the long time it took to reload a launcher, in contrast to standard guns which could sustain a continuous low rate of fire.

The sound of the rocket launching also was unique in that the constant &quotwoosh&quot sound that came from the firing of the rockets could be utilised for psychological warfare. The rocket’s devastating destruction also helped to reduced the morale of the German army.

Combat history
BM-13 battery fire, throughout the Battle of Berlin, April 1945, with metal blast covers pulled over the windshields

The a number of rocket launchers had been top secret in the starting of World War II. A specific unit of the NKVD secret police was raised to operate them.[2] On July 7, 1941, an experimental artillery battery of seven launchers was 1st used in battle at Orsha in Belarus, below the command of Captain Ivan Flyorov, destroying a station with several provide trains, and causing enormous German Army casualties. Following the achievement, the Red Army organized new Guards Mortar batteries for the help of infantry divisions. A battery’s complement was standardized at 4 launchers. They remained below NKVD handle till German Nebelwerfer rocket launchers became widespread later in the war.[six]
A battery of BM-31 multiple rocket launchers in operation

On August eight, 1941, Stalin ordered the formation of eight Special Guards Mortar regiments under the direct manage of the General Headquarters Reserve (Stavka-VGK). Each and every regiment comprised 3 battalions of three batteries, totalling 36 BM-13 or BM-8 launchers. Independent Guards Mortar battalions were also formed, comprising 36 launchers in 3 batteries of twelve. By the end of 1941, there had been eight regiments, 35 independent battalions, and two independent batteries in service, holding a total of 554 launchers.[11]

In June 1942 Heavy Guards Mortar battalions were formed about the new M-30 static rocket launch frames, consisting of 96 launchers in three batteries. In July, a battalion of BM-13s was added to the establishment of a tank corps.[12] In 1944, the BM-31 was used in Motorized Heavy Guards Mortar battalions of 48 launchers. In 1943, Guards Mortar brigades, and later divisions, have been formed equipped with static launchers.[11]

By the end of 1942, 57 regiments have been in service—together with the smaller independent battalions, this was the equivalent of 216 batteries: 21% BM-8 light launchers, 56% BM-13, and 23% M-30 heavy launchers. By the end of the war, the equivalent of 518 batteries had been in service.[11]
[edit] Katyushas since World War II
Russian forces use BM-27 rocket launchers during the Second Chechen War

The accomplishment and economy of multiple rocket launchers (MRL) have led them to continue to be created. In the course of the Cold War, the Soviet Union fielded a number of models of Katyushas, notably the BM-21 launchers fitting the stereotypical Katyusha mould, and the larger BM-27. Advances in artillery munitions have been applied to some Katyusha-type a number of launch rocket systems, like bomblet submunitions, remotely-deployed land mines, and chemical warheads.

With the breakup of the Soviet Union, Russia inherited most of its military arsenal such as the Katyusha rockets. In recent history, they have been used by Russian forces in the course of the 1st and Second Chechen Wars and by Armenian and Azerbaijani forces during the Nagorno-Karabakh War. Georgian government forces are reported to have utilised BM-21 or related rocket artillery in fighting in the 2008 South Ossetia war.[13]

Katyushas were exported to Afghanistan, Angola, Czechoslovakia, Egypt, East Germany, Hungary, Iran, Iraq, North Korea, Poland, Syria, and Vietnam. They were also constructed in Czechoslovakia[14], People’s Republic of China, North Korea, and Iran.[citation necessary]

Katyushas also saw action in the Korean War, utilised by the Chinese People’s Volunteer Army against the South and United Nations forces. Soviet BM-13s had been identified to have been imported to China prior to the Sino-Soviet split and had been operational in the People’s Liberation Army.

Israel captured BM-24 MRLs for the duration of the Six-Day War (1967), used them in two battalions in the course of the Yom Kippur War (1973) and the 1982 Lebanon War, and later created the MAR-240 launcher for the identical rockets, primarily based on a Sherman tank chassis. For the duration of the 2006 Lebanon War, Hezbollah fired between 3,970 and 4,228 rockets, from light truck-mounts and single-rail man-portable launchers. About 95% of these have been 122 mm (four.eight in) Syrian-manufactured Katyusha artillery rockets, which carried warheads up to 30 kg (66 lb) and had a range of up to 30 km (19 mi).[15][16].[15][17][18] Hamas has launched 122-mm “Grad-type Katyusha” rockets from the Gaza Strip against a number of cities in Israel,[19] even though they are not reported to have truck-mounted launchers.

Katyushas have been also allegedly utilized by the Rwandan Patriotic Front in the course of its 1990 invasion of Rwanda, by means of the 1994 genocide. They were successful in battle, but translated into much anti-Tutsi sentiment in the neighborhood media.[20]

It was reported that BM-21 launchers had been employed against American forces for the duration of 2003 invasion of Iraq. They have also been utilized in the Afghanistan and Iraq insurgencies. In Iraq, according to Related Press and Agence France-Presse reports, Katyusha rockets had been fired at the Green Zone late March 2008.[21][22]

Plastic Mould Suppliers from China and the Industries They Cater

Plastic has been contributing largely to the globe economy considering that the prior century. It’s been used as a raw material for a variety of industries and purposes for industrial as properly as domestic usage. Plastic is popular and steadily took over as an option to its metallic and alloy counterparts mostly simply because of its durability. Other benefits that plastic comes with, are, it weighs lighter and simpler to carry, corrosion free, straightforward to colour and finish as per requirements. Also, plastic is low in maintenance and saves a lot of power.

Plastic is a synthetic kind of non-metallic compounds. Plastic moulding is the procedure of putting molten plastic into pre constructed moulds of different shapes and sizes that are later removed when the plastic is cooled and hardened. There are distinct plastic moulding processes based upon the requirement. The most typical plastic moulding approach is Custom Plastic Injection Molding. In Custom Plastic Injection Molding , the melted plastic is forced into a hollow cavity or custom built moulds. Upon cooling, the moulds are removed to get the needed plastic mould. Injection Moulding machines were invented in 1930s and are mostly used for mass production or prototyping a specific custom mould. Bottle caps, toys, cell telephone covers, plastic cups, kitchen utensils are the most widespread merchandise created from this technique.

China supplies for a enormous percentage of the plastic moulds for different industries all more than the planet. Various industries like automotive, construction, pharmaceuticals, interior designing, furnitures and fixtures, food processing, drinks and beverages look for Plastic Injection Mould Suppliers China. There is stiff competitors amongst the suppliers and obtaining the best supplier to suit your needs and terms is a actual tough job.

Plastic Injection Mould Suppliers China concentrate on providing the best quality moulds at competitive prices. They also aim to satisfy their consumers in order to retain them for lengthy-term business relationship. Promotional activities and excellent networking are also prime objectives to receive new clients and secure their market place share.

Plastic is an crucial part of our everyday life. Be it house or workplace or anyplace we go, we can notice the use of plastic in distinct types. But there are certain dangers and hazards connected to processing and using of plastic also. The plastic mould manufactures must be cautious about the disposal of waste from their factories and processing units as the poisonous wastes pose a threat to the environment. Plastic is not soluble in water and produces poisonous gases upon burning. So it imposes a enormous threat upon the health of humans, other living creatures and plants. As a result, the plastic mould manufacturers need to be accountable sufficient to maintain the balance of eco system by recycling and controlling the emissions efficiently.

This post is written by Jacob Williams on behalf of HQMOULD. His knowledge in plastic moulding market has observed him contribute to and write a number of articles on topics like Plastic Mould, Custom Plastic Injection Molding, Plastic Injection Mould Suppliers China, plastic mould china and plastic mould factory and so forth.
Cool Auto Moulds China images

Cool Auto Moulds China images

Some cool auto moulds china images:

Steven F. Udvar-Hazy Center: P-38 Lightning, with B-29 Enola Gay behind it
auto moulds china
Image by Chris Devers

See more photos of this, and the Wikipedia article.

Details, quoting from Smithsonian National Air and Space Museum | Lockheed P-38J-10-LO Lightning

In the P-38 Lockheed engineer Clarence "Kelly" Johnson and his team of designers created one of the most successful twin-engine fighters ever flown by any nation. From 1942 to 1945, U. S. Army Air Forces pilots flew P-38s over Europe, the Mediterranean, and the Pacific, and from the frozen Aleutian Islands to the sun-baked deserts of North Africa. Lightning pilots in the Pacific theater downed more Japanese aircraft than pilots flying any other Allied warplane.

Maj. Richard I. Bong, America’s leading fighter ace, flew this P-38J-10-LO on April 16, 1945, at Wright Field, Ohio, to evaluate an experimental method of interconnecting the movement of the throttle and propeller control levers. However, his right engine exploded in flight before he could conduct the experiment.

Transferred from the United States Air Force.

Manufacturer:
Lockheed Aircraft Company

Date:
1943

Country of Origin:
United States of America

Dimensions:
Overall: 390 x 1170cm, 6345kg, 1580cm (12ft 9 9/16in. x 38ft 4 5/8in., 13988.2lb., 51ft 10 1/16in.)

Materials:
All-metal

Physical Description:
Twin-tail boom and twin-engine fighter; tricycle landing gear.

Long Description:
From 1942 to 1945, the thunder of P-38 Lightnings was heard around the world. U. S. Army pilots flew the P-38 over Europe, the Mediterranean, and the Pacific; from the frozen Aleutian Islands to the sun-baked deserts of North Africa. Measured by success in combat, Lockheed engineer Clarence "Kelly" Johnson and a team of designers created the most successful twin-engine fighter ever flown by any nation. In the Pacific Theater, Lightning pilots downed more Japanese aircraft than pilots flying any other Army Air Forces warplane.

Johnson and his team conceived this twin-engine, single-pilot fighter airplane in 1936 and the Army Air Corps authorized the firm to build it in June 1937. Lockheed finished constructing the prototype XP-38 and delivered it to the Air Corps on New Year’s Day, 1939. Air Corps test pilot and P-38 project officer, Lt. Benjamin S. Kelsey, first flew the aircraft on January 27. Losing this prototype in a crash at Mitchel Field, New York, with Kelsey at the controls, did not deter the Air Corps from ordering 13 YP-38s for service testing on April 27. Kelsey survived the crash and remained an important part of the Lightning program. Before the airplane could be declared ready for combat, Lockheed had to block the effects of high-speed aerodynamic compressibility and tail buffeting, and solve other problems discovered during the service tests.

The most vexing difficulty was the loss of control in a dive caused by aerodynamic compressibility. During late spring 1941, Air Corps Major Signa A. Gilke encountered serious trouble while diving his Lightning at high-speed from an altitude of 9,120 m (30,000 ft). When he reached an indicated airspeed of about 515 kph (320 mph), the airplane’s tail began to shake violently and the nose dropped until the dive was almost vertical. Signa recovered and landed safely and the tail buffet problem was soon resolved after Lockheed installed new fillets to improve airflow where the cockpit gondola joined the wing center section. Seventeen months passed before engineers began to determine what caused the Lightning’s nose to drop. They tested a scale model P-38 in the Ames Laboratory wind tunnel operated by the NACA (National Advisory Committee for Aeronautics) and found that shock waves formed when airflow over the wing leading edges reached transonic speeds. The nose drop and loss of control was never fully remedied but Lockheed installed dive recovery flaps under each wing in 1944. These devices slowed the P-38 enough to allow the pilot to maintain control when diving at high-speed.

Just as the development of the North American P-51 Mustang, Republic P-47 Thunderbolt, and the Vought F4U Corsair (see NASM collection for these aircraft) pushed the limits of aircraft performance into unexplored territory, so too did P-38 development. The type of aircraft envisioned by the Lockheed design team and Air Corps strategists in 1937 did not appear until June 1944. This protracted shakedown period mirrors the tribulations suffered by Vought in sorting out the many technical problems that kept F4U Corsairs off U. S. Navy carrier decks until the end of 1944.

Lockheed’s efforts to trouble-shoot various problems with the design also delayed high-rate, mass production. When Japan attacked Pearl Harbor, the company had delivered only 69 Lightnings to the Army. Production steadily increased and at its peak in 1944, 22 sub-contractors built various Lightning components and shipped them to Burbank, California, for final assembly. Consolidated-Vultee (Convair) subcontracted to build the wing center section and the firm later became prime manufacturer for 2,000 P-38Ls but that company’s Nashville plant completed only 113 examples of this Lightning model before war’s end. Lockheed and Convair finished 10,038 P-38 aircraft including 500 photo-reconnaissance models. They built more L models, 3,923, than any other version.

To ease control and improve stability, particularly at low speeds, Lockheed equipped all Lightnings, except a batch ordered by Britain, with propellers that counter-rotated. The propeller to the pilot’s left turned counter-clockwise and the propeller to his right turned clockwise, so that one propeller countered the torque and airflow effects generated by the other. The airplane also performed well at high speeds and the definitive P-38L model could make better than 676 kph (420 mph) between 7,600 and 9,120 m (25,000 and 30,000 ft). The design was versatile enough to carry various combinations of bombs, air-to-ground rockets, and external fuel tanks. The multi-engine configuration reduced the Lightning loss-rate to anti-aircraft gunfire during ground attack missions. Single-engine airplanes equipped with power plants cooled by pressurized liquid, such as the North American P-51 Mustang (see NASM collection), were particularly vulnerable. Even a small nick in one coolant line could cause the engine to seize in a matter of minutes.

The first P-38s to reach the Pacific combat theater arrived on April 4, 1942, when a version of the Lightning that carried reconnaissance cameras (designated the F-4), joined the 8th Photographic Squadron based in Australia. This unit launched the first P-38 combat missions over New Guinea and New Britain during April. By May 29, the first 25 P-38s had arrived in Anchorage, Alaska. On August 9, pilots of the 343rd Fighter Group, Eleventh Air Force, flying the P-38E, shot down a pair of Japanese flying boats.

Back in the United States, Army Air Forces leaders tried to control a rumor that Lightnings killed their own pilots. On August 10, 1942, Col. Arthur I. Ennis, Chief of U. S. Army Air Forces Public Relations in Washington, told a fellow officer "… Here’s what the 4th Fighter [training] Command is up against… common rumor out there that the whole West Coast was filled with headless bodies of men who jumped out of P-38s and had their heads cut off by the propellers." Novice Lightning pilots unfamiliar with the correct bailout procedures actually had more to fear from the twin-boom tail, if an emergency dictated taking to the parachute but properly executed, Lightning bailouts were as safe as parachuting from any other high-performance fighter of the day. Misinformation and wild speculation about many new aircraft was rampant during the early War period.

Along with U. S. Navy Grumman F4F Wildcats (see NASM collection) and Curtiss P-40 Warhawks (see NASM collection), Lightnings were the first American fighter airplanes capable of consistently defeating Japanese fighter aircraft. On November 18, men of the 339th Fighter Squadron became the first Lightning pilots to attack Japanese fighters. Flying from Henderson Field on Guadalcanal, they claimed three during a mission to escort Boeing B-17 Flying Fortress bombers (see NASM collection).

On April 18, 1943, fourteen P-38 pilots from the 70th and the 339th Fighter Squadrons, 347th Fighter Group, accomplished one of the most important Lightning missions of the war. American ULTRA cryptanalysts had decoded Japanese messages that revealed the timetable for a visit to the front by the commander of the Imperial Japanese Navy, Admiral Isoroku Yamamoto. This charismatic leader had crafted the plan to attack Pearl Harbor and Allied strategists believed his loss would severely cripple Japanese morale. The P-38 pilots flew 700 km (435 miles) at heights from 3-15 m (10-50 feet) above the ocean to avoid detection. Over the coast of Bougainville, they intercepted a formation of two Mitsubishi G4M BETTY bombers (see NASM collection) carrying the Admiral and his staff, and six Mitsubishi A6M Zero fighters (see NASM collection) providing escort. The Lightning pilots downed both bombers but lost Lt. Ray Hine to a Zero.

In Europe, the first Americans to down a Luftwaffe aircraft were Lt. Elza E. Shahan flying a 27th Fighter Squadron P-38E, and Lt. J. K. Shaffer flying a Curtiss P-40 (see NASM collection) in the 33rd Fighter Squadron. The two flyers shared the destruction of a Focke-Wulf Fw 200C-3 Condor maritime strike aircraft over Iceland on August 14, 1942. Later that month, the 1st fighter group accepted Lightnings and began combat operations from bases in England but this unit soon moved to fight in North Africa. More than a year passed before the P-38 reappeared over Western Europe. While the Lightning was absent, U. S. Army Air Forces strategists had relearned a painful lesson: unescorted bombers cannot operate successfully in the face of determined opposition from enemy fighters. When P-38s returned to England, the primary mission had become long-range bomber escort at ranges of about 805 kms (500 miles) and at altitudes above 6,080 m (20,000 ft).

On October 15, 1943, P-38H pilots in the 55th Fighter Group flew their first combat mission over Europe at a time when the need for long-range escorts was acute. Just the day before, German fighter pilots had destroyed 60 of 291 Eighth Air Force B-17 Flying Fortresses (see NASM collection) during a mission to bomb five ball-bearing plants at Schweinfurt, Germany. No air force could sustain a loss-rate of nearly 20 percent for more than a few missions but these targets lay well beyond the range of available escort fighters (Republic P-47 Thunderbolt, see NASM collection). American war planners hoped the long-range capabilities of the P-38 Lightning could halt this deadly trend, but the very high and very cold environment peculiar to the European air war caused severe power plant and cockpit heating difficulties for the Lightning pilots. The long-range escort problem was not completely solved until the North American P-51 Mustang (see NASM collection) began to arrive in large numbers early in 1944.

Poor cockpit heating in the H and J model Lightnings made flying and fighting at altitudes that frequently approached 12,320 m (40,000 ft) nearly impossible. This was a fundamental design flaw that Kelly Johnson and his team never anticipated when they designed the airplane six years earlier. In his seminal work on the Allison V-1710 engine, Daniel Whitney analyzed in detail other factors that made the P-38 a disappointing airplane in combat over Western Europe.

• Many new and inexperienced pilots arrived in England during December 1943, along with the new J model P-38 Lightning.

• J model rated at 1,600 horsepower vs. 1,425 for earlier H model Lightnings. This power setting required better maintenance between flights. It appears this work was not done in many cases.

• During stateside training, Lightning pilots were taught to fly at high rpm settings and low engine manifold pressure during cruise flight. This was very hard on the engines, and not in keeping with technical directives issued by Allison and Lockheed.

• The quality of fuel in England may have been poor, TEL (tetraethyl lead) fuel additive appeared to condense inside engine induction manifolds, causing detonation (destructive explosion of fuel mixture rather than controlled burning).

• Improved turbo supercharger intercoolers appeared on the J model P-38. These devices greatly reduced manifold temperatures but this encouraged TEL condensation in manifolds during cruise flight and increased spark plug fouling.

Using water injection to minimize detonation might have reduced these engine problems. Both the Republic P-47 Thunderbolt and the North American P-51 Mustang (see NASM collection) were fitted with water injection systems but not the P-38. Lightning pilots continued to fly, despite these handicaps.

During November 1942, two all-Lightning fighter groups, the 1st and the 14th, began operating in North Africa. In the Mediterranean Theater, P-38 pilots flew more sorties than Allied pilots flying any other type of fighter. They claimed 608 enemy a/c destroyed in the air, 123 probably destroyed and 343 damaged, against the loss of 131 Lightnings.

In the war against Japan, the P-38 truly excelled. Combat rarely occurred above 6,080 m (20,000 ft) and the engine and cockpit comfort problems common in Europe never plagued pilots in the Pacific Theater. The Lightning’s excellent range was used to full advantage above the vast expanses of water. In early 1945, Lightning pilots of the 12th Fighter Squadron, 18th Fighter Group, flew a mission that lasted 10 ½ hours and covered more than 3,220 km (2,000 miles). In August, P-38 pilots established the world’s long-distance record for a World War II combat fighter when they flew from the Philippines to the Netherlands East Indies, a distance of 3,703 km (2,300 miles). During early 1944, Lightning pilots in the 475th Fighter Group began the ‘race of aces.’ By March, Lieutenant Colonel Thomas J. Lynch had scored 21 victories before he fell to antiaircraft gunfire while strafing enemy ships. Major Thomas B. McGuire downed 38 Japanese aircraft before he was killed when his P-38 crashed at low altitude in early January 1945. Major Richard I. Bong became America’s highest scoring fighter ace (40 victories) but died in the crash of a Lockheed P-80 (see NASM collection) on August 6, 1945.

Museum records show that Lockheed assigned the construction number 422-2273 to the National Air and Space Museum’s P-38. The Army Air Forces accepted this Lightning as a P-38J-l0-LO on November 6, 1943, and the service identified the airplane with the serial number 42-67762. Recent investigations conducted by a team of specialists at the Paul E. Garber Facility, and Herb Brownstein, a volunteer in the Aeronautics Division at the National Air and Space Museum, have revealed many hitherto unknown aspects to the history of this aircraft.

Brownstein examined NASM files and documents at the National Archives. He discovered that a few days after the Army Air Forces (AAF) accepted this airplane, the Engineering Division at Wright Field in Dayton, Ohio, granted Lockheed permission to convert this P-38 into a two-seat trainer. The firm added a seat behind the pilot to accommodate an instructor who would train civilian pilots in instrument flying techniques. Once trained, these test pilots evaluated new Lightnings fresh off the assembly line.

In a teletype sent by the Engineering Division on March 2, 1944, Brownstein also discovered that this P-38 was released to Colonel Benjamin S. Kelsey from March 3 to April 10, 1944, to conduct special tests. This action was confirmed the following day in a cable from the War Department. This same pilot, then a Lieutenant, flew the XP-38 across the United States in 1939 and survived the crash that destroyed this Lightning at Mitchel Field, New York. In early 1944, Kelsey was assigned to the Eighth Air Force in England and he apparently traveled to the Lockheed factory at Burbank to pick up the P-38. Further information about these tests and Kelsey’s involvement remain an intriguing question.

One of Brownstein’s most important discoveries was a small file rich with information about the NASM Lightning. This file contained a cryptic reference to a "Major Bong" who flew the NASM P-38 on April 16, 1945, at Wright Field. Bong had planned to fly for an hour to evaluate an experimental method of interconnecting the movement of the throttle and propeller control levers. His flight ended after twenty-minutes when "the right engine blew up before I had a chance [to conduct the test]." The curator at the Richard I. Bong Heritage Center confirmed that America’s highest scoring ace made this flight in the NASM P-38 Lightning.

Working in Building 10 at the Paul E. Garber Facility, Rob Mawhinney, Dave Wilson, Wil Lee, Bob Weihrauch, Jim Purton, and Heather Hutton spent several months during the spring and summer of 2001 carefully disassembling, inspecting, and cleaning the NASM Lightning. They found every hardware modification consistent with a model J-25 airplane, not the model J-10 painted in the data block beneath the artifact’s left nose. This fact dovetails perfectly with knowledge uncovered by Brownstein. On April 10, the Engineering Division again cabled Lockheed asking the company to prepare 42-67762 for transfer to Wright Field "in standard configuration." The standard P-38 configuration at that time was the P-38J-25. The work took several weeks and the fighter does not appear on Wright Field records until May 15, 1944. On June 9, the Flight Test Section at Wright Field released the fighter for flight trials aimed at collecting pilot comments on how the airplane handled.

Wright Field’s Aeromedical Laboratory was the next organization involved with this P-38. That unit installed a kit on July 26 that probably measured the force required to move the control wheel left and right to actuate the power-boosted ailerons installed in all Lightnings beginning with version J-25. From August 12-16, the Power Plant Laboratory carried out tests to measure the hydraulic pump temperatures on this Lightning. Then beginning September 16 and lasting about ten days, the Bombing Branch, Armament Laboratory, tested type R-3 fragmentation bomb racks. The work appears to have ended early in December. On June 20, 1945, the AAF Aircraft Distribution Office asked that the Air Technical Service Command transfer the Lightning from Wright Field to Altus Air Force Base, Oklahoma, a temporary holding area for Air Force museum aircraft. The P-38 arrived at the Oklahoma City Air Depot on June 27, 1945, and mechanics prepared the fighter for flyable storage.

Airplane Flight Reports for this Lightning also describe the following activities and movements:

6-21-45 Wright Field, Ohio, 5.15 hours of flying.
6-22-45Wright Field, Ohio, .35 minutes of flying by Lt. Col. Wendel [?] J. Kelley and P. Shannon.
6-25-45Altus, Oklahoma, .55 hours flown, pilot P. Shannon.
6-27-45Altus, Oklahoma, #2 engine changed, 1.05 hours flown by Air Corps F/O Ralph F. Coady.
10-5-45 OCATSC-GCAAF (Garden City Army Air Field, Garden City, Kansas), guns removed and ballast added.
10-8-45Adams Field, Little Rock, Arkansas.
10-9-45Nashville, Tennessee,
5-28-46Freeman Field, Indiana, maintenance check by Air Corps Capt. H. M. Chadhowere [sp]?
7-24-46Freeman Field, Indiana, 1 hour local flight by 1st Lt. Charles C. Heckel.
7-31-46 Freeman Field, Indiana, 4120th AAF Base Unit, ferry flight to Orchard Place [Illinois] by 1st Lt. Charles C. Heckel.

On August 5, 1946, the AAF moved the aircraft to another storage site at the former Consolidated B-24 bomber assembly plant at Park Ridge, Illinois. A short time later, the AAF transferred custody of the Lightning and more than sixty other World War II-era airplanes to the Smithsonian National Air Museum. During the early 1950s, the Air Force moved these airplanes from Park Ridge to the Smithsonian storage site at Suitland, Maryland.

• • •

Quoting from Wikipedia | Lockheed P-38 Lightning:

The Lockheed P-38 Lightning was a World War II American fighter aircraft built by Lockheed. Developed to a United States Army Air Corps requirement, the P-38 had distinctive twin booms and a single, central nacelle containing the cockpit and armament. Named "fork-tailed devil" by the Luftwaffe and "two planes, one pilot" by the Japanese, the P-38 was used in a number of roles, including dive bombing, level bombing, ground-attack, photo reconnaissance missions, and extensively as a long-range escort fighter when equipped with drop tanks under its wings.

The P-38 was used most successfully in the Pacific Theater of Operations and the China-Burma-India Theater of Operations as the mount of America’s top aces, Richard Bong (40 victories) and Thomas McGuire (38 victories). In the South West Pacific theater, the P-38 was the primary long-range fighter of United States Army Air Forces until the appearance of large numbers of P-51D Mustangs toward the end of the war. The P-38 was unusually quiet for a fighter, the exhaust muffled by the turbo-superchargers. It was extremely forgiving, and could be mishandled in many ways, but the rate of roll was too slow for it to excel as a dogfighter. The P-38 was the only American fighter aircraft in production throughout American involvement in the war, from Pearl Harbor to Victory over Japan Day.

Variants: Lightning in maturity: P-38J

The P-38J was introduced in August 1943. The turbo-supercharger intercooler system on previous variants had been housed in the leading edges of the wings and had proven vulnerable to combat damage and could burst if the wrong series of controls were mistakenly activated. In the P-38J model, the streamlined engine nacelles of previous Lightnings were changed to fit the intercooler radiator between the oil coolers, forming a "chin" that visually distinguished the J model from its predecessors. While the P-38J used the same V-1710-89/91 engines as the H model, the new core-type intercooler more efficiently lowered intake manifold temperatures and permitted a substantial increase in rated power. The leading edge of the outer wing was fitted with 55 gal (208 l) fuel tanks, filling the space formerly occupied by intercooler tunnels, but these were omitted on early P-38J blocks due to limited availability.

The final 210 J models, designated P-38J-25-LO, alleviated the compressibility problem through the addition of a set of electrically-actuated dive recovery flaps just outboard of the engines on the bottom centerline of the wings. With these improvements, a USAAF pilot reported a dive speed of almost 600 mph (970 km/h), although the indicated air speed was later corrected for compressibility error, and the actual dive speed was lower. Lockheed manufactured over 200 retrofit modification kits to be installed on P-38J-10-LO and J-20-LO already in Europe, but the USAAF C-54 carrying them was shot down by an RAF pilot who mistook the Douglas transport for a German Focke-Wulf Condor. Unfortunately the loss of the kits came during Lockheed test pilot Tony LeVier‘s four-month morale-boosting tour of P-38 bases. Flying a new Lightning named "Snafuperman" modified to full P-38J-25-LO specs at Lockheed’s modification center near Belfast, LeVier captured the pilots’ full attention by routinely performing maneuvers during March 1944 that common Eighth Air Force wisdom held to be suicidal. It proved too little too late because the decision had already been made to re-equip with Mustangs.

The P-38J-25-LO production block also introduced hydraulically-boosted ailerons, one of the first times such a system was fitted to a fighter. This significantly improved the Lightning’s rate of roll and reduced control forces for the pilot. This production block and the following P-38L model are considered the definitive Lightnings, and Lockheed ramped up production, working with subcontractors across the country to produce hundreds of Lightnings each month.

Noted P-38 pilots

Richard Bong and Thomas McGuire

The American ace of aces and his closest competitor both flew Lightnings as they tallied 40 and 38 victories respectively. Majors Richard I. "Dick" Bong and Thomas J. "Tommy" McGuire of the USAAF competed for the top position. Both men were awarded the Medal of Honor.

McGuire was killed in air combat in January 1945 over the Philippines, after racking up 38 confirmed kills, making him the second-ranking American ace. Bong was rotated back to the United States as America’s ace of aces, after making 40 kills, becoming a test pilot. He was killed on 6 August 1945, the day the atomic bomb was dropped on Japan, when his P-80 Shooting Star jet fighter flamed out on takeoff.

Charles Lindbergh

The famed aviator Charles Lindbergh toured the South Pacific as a civilian contractor for United Aircraft Corporation, comparing and evaluating performance of single- and twin-engined fighters for Vought. He worked to improve range and load limits of the F4U Corsair, flying both routine and combat strafing missions in Corsairs alongside Marine pilots. In Hollandia, he attached himself to the 475th FG flying P-38s so that he could investigate the twin-engine fighter. Though new to the machine, he was instrumental in extending the range of the P-38 through improved throttle settings, or engine-leaning techniques, notably by reducing engine speed to 1,600 rpm, setting the carburetors for auto-lean and flying at 185 mph (298 km/h) indicated airspeed which reduced fuel consumption to 70 gal/h, about 2.6 mpg. This combination of settings had been considered dangerous; it was thought it would upset the fuel mixture and cause an explosion. Everywhere Lindbergh went in the South Pacific, he was accorded the normal preferential treatment of a visiting colonel, though he had resigned his Air Corps Reserve colonel’s commission three years before. While with the 475th, he held training classes and took part in a number of Army Air Corps combat missions. On 28 July 1944, Lindbergh shot down a Mitsubishi Ki-51 "Sonia" flown expertly by the veteran commander of 73rd Independent Flying Chutai, Imperial Japanese Army Captain Saburo Shimada. In an extended, twisting dogfight in which many of the participants ran out of ammunition, Shimada turned his aircraft directly toward Lindbergh who was just approaching the combat area. Lindbergh fired in a defensive reaction brought on by Shimada’s apparent head-on ramming attack. Hit by cannon and machine gun fire, the "Sonia’s" propeller visibly slowed, but Shimada held his course. Lindbergh pulled up at the last moment to avoid collision as the damaged "Sonia" went into a steep dive, hit the ocean and sank. Lindbergh’s wingman, ace Joseph E. "Fishkiller" Miller, Jr., had also scored hits on the "Sonia" after it had begun its fatal dive, but Miller was certain the kill credit was Lindbergh’s. The unofficial kill was not entered in the 475th’s war record. On 12 August 1944 Lindbergh left Hollandia to return to the United States.

Charles MacDonald

The seventh-ranking American ace, Charles H. MacDonald, flew a Lightning against the Japanese, scoring 27 kills in his famous aircraft, the Putt Putt Maru.

Robin Olds

Main article: Robin Olds

Robin Olds was the last P-38 ace in the Eighth Air Force and the last in the ETO. Flying a P-38J, he downed five German fighters on two separate missions over France and Germany. He subsequently transitioned to P-51s to make seven more kills. After World War II, he flew F-4 Phantom IIs in Vietnam, ending his career as brigadier general with 16 kills.

Clay Tice

A P-38 piloted by Clay Tice was the first American aircraft to land in Japan after VJ-Day, when he and his wingman set down on Nitagahara because his wingman was low on fuel.

Antoine de Saint-Exupéry

Noted aviation pioneer and writer Antoine de Saint-Exupéry vanished in a F-5B-1-LO, 42-68223, c/n 2734, of Groupe de Chasse II/33, out of Borgo-Porreta, Bastia, Corsica, a reconnaissance variant of the P-38, while on a flight over the Mediterranean, from Corsica to mainland France, on 31 July 1944. His health, both physical and mental (he was said to be intermittently subject to depression), had been deteriorating and there had been talk of taking him off flight status. There have been suggestions (although no proof to date) that this was a suicide rather than an aircraft failure or combat loss. In 2000, a French scuba diver found the wreckage of a Lightning in the Mediterranean off the coast of Marseille, and it was confirmed in April 2004 as Saint-Exupéry’s F-5B. No evidence of air combat was found. In March 2008, a former Luftwaffe pilot, Horst Rippert from Jagdgruppe 200, claimed to have shot down Saint-Exupéry.

Adrian Warburton

The RAF’s legendary photo-recon "ace", Wing Commander Adrian Warburton DSO DFC, was the pilot of a Lockheed P-38 borrowed from the USAAF that took off on 12 April 1944 to photograph targets in Germany. W/C Warburton failed to arrive at the rendezvous point and was never seen again. In 2003, his remains were recovered in Germany from his wrecked USAAF P-38 Lightning.

• • • • •

Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress "Enola Gay":

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of World War II and the first bomber to house its crew in pressurized compartments. Although designed to fight in the European theater, the B-29 found its niche on the other side of the globe. In the Pacific, B-29s delivered a variety of aerial weapons: conventional bombs, incendiary bombs, mines, and two nuclear weapons.

On August 6, 1945, this Martin-built B-29-45-MO dropped the first atomic weapon used in combat on Hiroshima, Japan. Three days later, Bockscar (on display at the U.S. Air Force Museum near Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Great Artiste, flew as an observation aircraft on both missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Country of Origin:
United States of America

Dimensions:
Overall: 900 x 3020cm, 32580kg, 4300cm (29ft 6 5/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Materials:
Polished overall aluminum finish

Physical Description:
Four-engine heavy bomber with semi-monoqoque fuselage and high-aspect ratio wings. Polished aluminum finish overall, standard late-World War II Army Air Forces insignia on wings and aft fuselage and serial number on vertical fin; 509th Composite Group markings painted in black; "Enola Gay" in black, block letters on lower left nose.

Cool China Auto Interior Mould photos

Cool China Auto Interior Mould photos

Some cool china auto interior mould images:

Steven F. Udvar-Hazy Center: View of south hangar, which includes B-29 Superfortress “Enola Gay”, a glimpse of the Air France Concorde, and many other individuals
china auto interior mould
Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of Planet War II and the first bomber to home its crew in pressurized compartments. Even though developed to fight in the European theater, the B-29 discovered its niche on the other side of the globe. In the Pacific, B-29s delivered a variety of aerial weapons: conventional bombs, incendiary bombs, mines, and two nuclear weapons.

On August six, 1945, this Martin-built B-29-45-MO dropped the very first atomic weapon utilised in combat on Hiroshima, Japan. 3 days later, Bockscar (on show at the U.S. Air Force Museum near Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Fantastic Artiste, flew as an observation aircraft on both missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Nation of Origin:
United States of America

Dimensions:
Overall: 900 x 3020cm, 32580kg, 4300cm (29ft 6 five/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Materials:
Polished general aluminum finish

Physical Description:
4-engine heavy bomber with semi-monoqoque fuselage and high-aspect ratio wings. Polished aluminum finish all round, common late-World War II Army Air Forces insignia on wings and aft fuselage and serial number on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on reduce left nose.

Steven F. Udvar-Hazy Center: View over Planet War Two aviation wing, such as Japanese planes and B-29 Enola Gay
china auto interior mould
Image by Chris Devers
See far more photographs of this, and the Wikipedia post.

Particulars, quoting from Smithsonian National Air and Space Museum: Steven F. Udvar-Hazy | Nakajima J1N1-S Gekko (Moonlight) IRVING:

Originally designed as a three-seat, daylight escort fighter plane by the Nakajima Aeroplane Business, Ltd., and flown in 1941, the IRVING was modified as a evening fighter in Could of 1943 and shot down two American B-17 bombers to prove its capability. The Gekko (which means moonlight) was redesigned to hold only two crewmen so that an upward firing gun could be mounted where the observer once sat. Nearly five hundred J1N1 aircraft, including prototypes, escort, reconnaissance, and evening fighters were constructed throughout World War II. A sizeable number had been also utilised as Kamikaze aircraft in the Pacific. The handful of that survived the war were scrapped by the Allies.

This J1N1 is the final remaining in the planet. It was transported from Japan to the U.S. exactly where it was flight tested by the U.S. Army Air Forces in 1946. The Gekko then flew to storage at Park Ridge, IL, and was transferred to the Smithsonian Institution. The restoration of this aircraft, completed in 1983, took much more than four years and 17,000 man-hours to accomplish.

Transferred from the United States Air Force.

Manufacturer:
Nakajima Hikoki K. K.

Date:
1942

Country of Origin:
Japan

Dimensions:
General: 15ft 1 1/8in. x 41ft 11 15/16in., 10670.3lb., 55ft 9 five/16in. (460 x 1280cm, 4840kg, 1700cm)

Materials:
All-metal, monocoque construction airplane

Physical Description:
Twin-engine, traditional layout with tailwheel-variety landing gear.
Armament: (two) 20 mm fixed upward firing cannon
Engines: (two) Nakajima Sakae 21 (NK1F, Ha35- 21) 14- cylinder air-cooled radial 1,130 horsepower (metric)

• • • • •

See much more photos of this, and the Wikipedia report.

Specifics, quoting from Smithsonian National Air and Space Museum: Steven F. Udvar-Hazy | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of Globe War II and the very first bomber to house its crew in pressurized compartments. Even though designed to fight in the European theater, the B-29 discovered its niche on the other side of the globe. In the Pacific, B-29s delivered a variety of aerial weapons: standard bombs, incendiary bombs, mines, and two nuclear weapons.

On August six, 1945, this Martin-built B-29-45-MO dropped the 1st atomic weapon utilised in combat on Hiroshima, Japan. 3 days later, Bockscar (on show at the U.S. Air Force Museum near Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Wonderful Artiste, flew as an observation aircraft on both missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Country of Origin:
United States of America

Dimensions:
All round: 900 x 3020cm, 32580kg, 4300cm (29ft 6 five/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Components:
Polished general aluminum finish

Physical Description:
4-engine heavy bomber with semi-monoqoque fuselage and high-aspect ratio wings. Polished aluminum finish general, regular late-Planet War II Army Air Forces insignia on wings and aft fuselage and serial quantity on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on decrease left nose.

Good China Fender Molding pictures

Good China Fender Molding pictures

Verify out these china fender molding pictures:

IMG_6387
china fender molding
Image by Christine G. H. Franck
&quotChina table
1765-1775
Origin: America, Virginia, Williamsburg
OH: 30 1/eight&quot OW: 36 three/8&quot OD: 23 five/16&quot
All components are of mahogany.
Bought with funds provided by Mrs. William C. Schoettle

Acc. No. 1980-95

Appearance: rectangular prime with astragal molded edge sawn interlacing guilloche fretwork gallery with astragal molded best edge 4 fretwork aprons with sawn and drilled foliated pattern front and rear aprons feature fretwork pendants centering profile of a bird, that on rear side in blind profile, that on front with carved tail, feather, eye, and beak information 4 legs, L-shaped in cross section, with sawn and drilled fretwork of rosettes and interlacing scrolls every single leg flanked by two sawn fretwork brackets incorporating C-scrolls.

Construction: The legs are not mitered, as on most British examples, but sawn from solid single boards. The rails and gallery are solid nonlaminated elements as well. The gallery is mitered at the corners and glued into a rabbet at the outer edges of the single-board best, which in turn is nailed to the frame by way of the rabbet. Vertical quarter-round mahogany blocks further support the gallery at its corners and an astragal molding is glued and nailed to the edges of the best. The rails are tenoned into the legs, and the knee brackets are glued and nailed to the legs and aprons without having advantage of tenons.

Mark(s): None.

Inscription(s): None.

Label:
In explaining the use of china tables, Thomas Chippendale wrote in 1762 that they had been intended &quotfor holding every a Set of China, and may be used as Tea-Tables.&quot With their fencelike fretwork galleries, china tables had been admirably suited for the protection of pricey tea wares. More essential, they provided gentry householders an uncommonly sophisticated indicates of displaying tea china even when it was not in use, as a result providing visitors with a visual reminder of the owner’s taste, status, and social position.

China tables have been comparatively common in Britain but were made infrequently in the colonies. Most of the known American examples were manufactured in these urban centers exactly where British influence on local cabinetmaking was especially robust. One example is Portsmouth, New Hampshire, where at least eight ornate china tables with elaborate crossed stretchers have been produced throughout the third quarter of the eighteenth century. Portsmouth artisans had been heavily influenced by the Boston cabinet trade till some shifted to a strikingly British furnishings style in the 1760s and 1770s, a adjust most likely caused by the arrival of a couple of British cabinetmakers about that time.

China tables were also created in Charleston, South Carolina, another center exactly where British influence prevailed. Though no extant Charleston china tables have yet been identified, records of their production survive. In 1772, cabinetmaker Richard Magrath, who had not too long ago arrived from London, advertised his ability to make a wide assortment of trendy furnishings forms like &quotChina Tables.&quot Thomas Elfe made the kind as well, supplying tables with a range of optional elements. Elfe’s accounts among 1768 and 1775 list everything from straightforward &quotChina Tables&quot or a &quotchina tea table&quot to a &quotChina frett tea table&quot and &quotcommode [i.e., serpentine] fret China Tables with castors.&quot The Elfe accounts also acknowledge the inherent fragility of china tables since the artisan recorded mending and even replacing their fretwork galleries routinely.

British-oriented cabinetmakers in Williamsburg created their share of china tables also. Eight tables are known, amongst them this well-preserved instance that descended in the Lewis and Byrd families of nearby Gloucester County. As opposed to most American china tables, this one and a associated Williamsburg instance now owned by the State Department have legs composed of open fretwork. The foliated fret pattern mirrors that used for the carved blind frets on the back of the Masonic Master’s chair made for Lodge six in Williamsburg. This association, collectively with the table’s neighborhood history, accounts for the Williamsburg attribution. The exact same fret pattern also seems in the richly carved aprons of a number of extremely various but no much less outstanding Williamsburg china tables, like acc. 1991-431. The fret design and style was probably adapted from a number of patterns for fireplace fenders published in the 1764-1765 edition of HOUSEHOLD Furnishings IN THE PRESENT TASTE. Even the birds in the front and rear aprons of the present table can be traced to this supply.

One particular of the most puzzling elements of china table production in colonial Tidewater Virginia is the intrinsically ornate nature of the type, which is at odds with the neat and plain taste that permeates most other eastern Virginia cabinet wares of the exact same date. There is no concrete explanation for the anomaly, though an intriguing connection could hyperlink Masonic chairs and china tables. Though the chairs had been used in the meeting halls of an exclusive fraternal society and the tables had been produced for the parlors and drawing rooms of the wealthy elite, every single type was nonetheless a central element in elaborate ceremonies–ritualized secret meetings on the one particular hand and ritualized social gatherings on the other. Maybe their roles as symbolic focal points of crucial social ceremonies demanded high levels of ornamentation.

Provenance:
The table was identified in the loved ones of the last private owner as the &quotLewis Table&quot and the &quotSusan Lewis Table.&quot According to family members tradition, it descended from Susan Lewis (b. 1782) and her husband, William Powell Byrd (b. 1776), of Whitehall, Gloucester Co., Va., via the family members to Richard Corbin Byrd (b. 1837), to his daughter, Fanny Marshall Byrd (1869-1960), who bequeathed the table to her daughter, Katherine Corbin Waller (1899-1994), from whom the table was acquired by CWF in 1980.&quot

From: emuseum.history.org/code/emuseum.asp?action=newpage&amps…

Image from page 536 of “Canadian transportation & distribution management” (1913)
china fender molding
Image by Web Archive Book Images
Identifier: canadiantransport1913
Title: Canadian transportation &amp distribution management
Year: 1913 (1910s)
Authors:
Subjects: Freight and freightage Shipment of goods Transportation
Publisher: Don Mills, Ont. : Southam Business Publications
Contributing Library: Fisher – University of Toronto
Digitizing Sponsor: University of Toronto

View Book Page: Book Viewer
About This Book: Catalog Entry
View All Pictures: All Images From Book

Click here to view book online to see this illustration in context in a browseable online version of this book.

Text Appearing Just before Image:
y for National Trancon-tinental Railway at Quebec. The N/T.R. Commission has let a con-tract for constructing a steam automobile ferry toCaminell, Laird and Co., Birkenhead, Eng.,to be utilized near ithe City of Quebec for thetransportation of trains across the St. Law-rence River, pending the completion of theQuebec bridge. The principal dimensions, and so on., will be asfollows:—Length on 15 ft. water line, 304ft. length more than fenders, about 326 ft.breadth, intense, about 66 ft. 9y2ins.depth moulded, 23 ft. imply draught withtrain load of 1,285 tons (gross), IS ft.speed, with train load of 550 tons (gross),15 statute miles per hour. The vessel will be of the twin screwtype, with a third ice breaking propellerfitted at the fore finish, for the carrying ofpassenger and freight trains at all seasonsof the year, these trains being of standardtype and composed as follows:—Standardpassenger train: 1 locomotive, 70 ft. 3express and baggage automobiles, 67 ft. each and every 3passenger cars, 80 ft., every three sleeping automobiles,

Text Appearing Soon after Image:
The Reid Newfoundland Co.s Steamship Lintrose. beam, and in addition to the usual installa-tions, of electric light, steam heating, and so on.,wireless telegraph is fitted. The propellingmachinery consists of single screw triple ex-pansion engines, supplied with steam byfour massive boilers functioning beneath forceddraught. On the trial trips the machineryworked without the slightest hitch, givingsatisfaction to all concerned. A maximumspeed of almost 16 knots was attained.(Mair., pg. 145.) The Canadian Pacific Railways PacificSteamship Service. The C.P.R.s new steamship Empress ofRussia sailed from Liverpool. Eng., April 1,via the Mediterranean, Suez Canal, Colombo,Singapore, for Hong Kong, China, to takeher spot on the Pacific service betweenBritish Columbia, Japan and China, and sheis expected to reach Vancouver, June 7. Shecarried a considerable number of passengers. The second of the companys new ves-sels, the Empress of Asia, will leave Liver-pool, June 14, and will proceed by means of Maderia,Cape

Note About Photos
Please note that these images are extracted from scanned page photos that may possibly have been digitally enhanced for readability – coloration and appearance of these illustrations may possibly not perfectly resemble the original work.